Titley Electronics

Products > Aerials & antennae

Aerials & antennae

Model and Description	Application Recommendations	Size for 151 MHz	Weight	Picture
AY/C Three element Yagi antenna, gamma tuned for receiving from longer distances. Heavy-duty spring-loaded folding elements and pistol grip handle make this the ideal antenna.	For tracking weak to strong signals needing good direction finding capability. This antenna with its folding elements is ideal for use in rough terrain.	1025 x 690mm	750 grams	View large View large
AY/4 Four element non-collapsible Yagi antenna, more suitable for fixed stations mounted on top of a mast for best reception.	For tracking weak to strong signals needing superior direction finding capability. This antenna is optimised for gain and directivity.	1025 x 950mm	620 grams	View large
AO Magnetic-based, omni-directional antenna, designed to sit on roof of vehicle. Capable of withstanding wind pressure of 100kph.	For detection of signals within a prescribed radius to establish presence of the transmitter. Once a signal is detected, the antenna is changed to a directional antenna to establish the bearing of the signal	1380mm H X 90mm magnetic base	830 grams	View large
AW This is a collapsible wand or stick antenna. It is used for close work, up to 50 metres, and can pinpoint to the square inch, hard to locate or buried transmitters.	For locating transmitters in the near field of reception. Standard directional antenna overload on the strong signals and can’t indicate reliable direction information, whereas the design of the AW antenna gives excellent location indication performance.	830mm long x 100mm diameter	270 grams	View large
Antennae booster This will fit to all existing antennae, boosting signals.	For amplifying weak signals when using long cables, or old receiving equipment. Ideal for towers.	100mm long x 25mm diameter	100 grams	View large