AnaBat SD1 Bat Detector

The AnaBat SD1 is a combined bat detector and storage ZCAIM housed in one chassis. It offers the functionality of the AnaBat II bat detector and the AnaBat Storage CF ZCAIM and does so in a compact, rugged package.

The Bat Detector can be connected to a PDA or laptop computer, via a null modem interface cable, to produce real time sonograms of detected bat calls, using the supplied AnaPocket or AnalookW programs respectively. The serial connection can also be used to set the Bat Detector's internal clock and for other purposes using the CFCread program. The Computer Connection can also be used to connect the Bat Detector to a GPS unit, in which case GPS position data can be incorporated into the data stream, and saved onto an installed CF card along with the bat call data.

Use of a PDA as an analysis tool eliminates the need for a PC in the field for active monitoring and real time analysis. The SD1 is offered with a variety of optional accessories, including a Hewlett Packard PDA preloaded with AnaBat software, the associated interface cabling, extra microphones, and compact flash memory cards.

The SD1 can be powered from either internal or external batteries. For long-term passive monitoring, it should be powered by an external 12 Volt battery connected to the +12 VOLTS socket on the side of the Bat Detector. When a plug is inserted into the +12 VOLTS socket (+ve centre pin), it switches the internal batteries out of circuit. For overnight or shorter use, the SD1 can be powered by 4 'AA' size batteries. These batteries can be non-rechargeable Alkaline batteries, or rechargeable Nickel Cadmium, or Nickel Metal Hydride batteries.

 

Frequency range:	10-200 kHz
Compatible:	Computer, PDA, GPS
Data storage:	Compact Flash (Type 1) capable
Three switch:	Selectable division ratios (8, 16 and 32)
Features:	Low battery indicator LED Inbuilt loudspeaker Socket for headphones Electret microphone Calibration tone Sensitivity control Single hand operation 12 volt auxiliary socket High frequency output Replaceable Transducer - Model STI (standard use), Model Hi-Mic (for use on extension cables), Model Lo-Mic (for low frequency bats)
Optional:	Leather carry case

 

Industries serviced Bat researchers Environmental consultants Government agencies

Related links Accessories Latest software Contact Titley

© Copyright 2006 Titley Electronics. All rights reserved. Design by PROdesign.