Regal
2000 Telemetry Receiver
The Regal 2000 Telemetry Receiver features synthesised continuous tuning over two adjacent 1MHz bands for straightforward wildlife tracking. It is both compact and lightweight and features an illuminated front panel and a heavy duty leather carrying case for ease of use and functionality in the field. The recommended antenna is our Model AY/C Yagi. The heavy duty, spring-loaded folding elements of this antenna make it ideal for use in all environments, and easy to fold up to carry or store when not in use.
The Regal is a sensitive, high gain, low noise receiver housed in a durable aluminium chassis.
| Size: | Height 40mm x Width 170mm x Depth 120mm |
| Weight: | 845 grams |
| Power requirements: | 12 volts internal 8 AA NiCad rechargeable pack |
| BFO: | Adjustable |
| Sensitivity: | 10dB s+s/n ratio at -130dBm |
| Gain control: | Ttypically 80dB |
| Bandwidth: | +/-1.2 kHz from channel centre for -6dB attenuation +/-2.65 kHz from channel centre 80 dB down |
| Minimum discernable signal: | Down to -150dBm |
| Freq. stability: | Better than 1 kHz from -15 degrees C to +45 degrees C |
| Audio output: | More than 250 mW into 8 ohm internal speaker |
| Auxiliary output: | Stereo jack provided for phones or recorder, (8-150ohms for 25mW), switches out internal speaker |
| Field strength meter | Choice of two readings: (1) Sample and Hold; (2) Sample and Decay |
| Current consumption: | Typically 40 ma for quiescent receiver |
| Battery: | Rechargeable battery pack. 20 hours use |
| Features: | Press-button Frequency Selectors. Illuminated Field Strength Meter and Frequency Selectors for night time use.Separate Volume and Gain controls. Battery Test function. |
| Small physical size: | 40 x 170 x 120mm |
| Light weight: | 845 grams. Strong aluminium case.Heavy leather carrying case. |
© Copyright 2006 Titley Electronics. All rights reserved. Design by PROdesign.